GROLAB USERBOT HW01 Manuel D'installation page 21

Example 2
Connec ng a DC motor (peristal c pump, water pump...).
To interface the DC motor, open the
UserBot.ino
UserBot-DCMotor
func on. This func on contains the configu-
ra on for all the inputs and outputs. You
should adjust the code to match the electro-
nics you assembled on the board. For the
example diagram the code should be the
following:
INPUTS CONFIGURATION
(
examples
) and navigate to the setup
OpenGrow
→
EN
ES
FR
→
PT
IT
20