Publicité
POWR
EXHAUST COVER
CHECKING THE EXHAUST COVER
Check:
•
Exhaust inner cover
Cracks/damage → Replace.
Carbon deposits → Clean.
(use a round scraper)
•
Exhaust outer cover
Cracks/damage → Replace.
CAUTION:
Do not scratch the fitting surfaces of the
cylinder and exhaust cover.
INSTALLING THE EXHAUST COVER
Install:
•
Exhaust cover
NOTE:
• Apply LOCTITE
• Tighten the exhaust cover mounting
bolts in sequence and in two steps of
torque.
Exhaust cover mounting bolts
1st: 4 N
2nd: 8 N
5-26
®
No.572 on the bolts.
m (0.4 kgf
m, 3.0 ft
•
•
m (0.8 kgf
m, 5.9 ft
•
•
E
lb)
•
lb)
•
Publicité
Chapitres
