Nice Riva Serie Instructions Et Avertissements Pour L'installation page 53

9 once the adjustments have been made, insert the motor (I) into
the foundation box (A), taking care to position it at the end of the
box and so that the fixing holes on the gear motor match those
on the box itself ("Figure 14")
14
10 Insert, into the holes (J), the supplied fixing screws (K) and tight-
en them until the gear motor is slightly raised above the bottom
of the box ("Figure 15")
15
K
J
A
I
11 Slowly move the door to allow it to engage with the gear motor;
when finished, tighten the fixing screws (K) fully ("Figure 16")
16
K
K
3
1
2
Clack!
ENGLISH – 11