Selecting The Input Signal - Sony UP-55MD Mode D'emploi

Selecting the Input Signal

Before printing, select the appropriate input signal (the
input connector to which the signal to be printed is being
input) VIDEO, S VIDEO, or COMP.
2, 5 2, 4, 5
2, 3
1
1
Turn on the video monitor and the printer.
2
Press the MENU button and display the INPUT
SETUP menu by pressing the F, f, G or g button.
Highlight IN in green by pressing the F, f, G or g button,
then the INPUT SETUP menu appears.
3
Select INPUT SEL by pressing the F or f button.
Highlight INPUT SEL in green by pressing
the F or f button.
4
Select the desired input signal by pressing the G or
g button.
Highlight the desired input signal in green
by pressing the G or g button. The selected
input signal turns green and is spelled out.
.
Source signal of the
image to be printed
Signal from video
equipment connected to the
VIDEO IN connector
Signal from video
equipment connected to the
S VIDEO IN connector
Signal from video
equipment connected to the
RGB/YCbCr/SYNC
INPUT connectors
When you select COMP.
When you use the RGB/YCbCr INPUT connectors
to input the image data, select the appropriate type
of the input signal.
1 Select INPUT FORM by pressing the f button.
Highlight INPUT FORM in green by
pressing the f button.
Video monitor and
printer window display
(the selected input
signal is spelled out)
V tVIDEO
SV t S-VIDEO
Ct COMP.
19
Before Printing