Sony UP-55MD Mode D'emploi page 54

Also, you can make a printout using temporarily set
values, without clearing the stored adjustment values.
Perform the adjustments while viewing the images
captured in memory.
1
Display the COLOR ADJUST menu.
COLOR ADJUST menu
2
Select the LOAD COLOR number of the values to
be adjusted or to be modified by pressing the G or
g button.
When modifying, you can preserve the original
settings. (See "To retain the originally set value" on
page 55.)
54
Adjusting the Color and Picture Quality
3
Adjust the printout color.
Items to be used for adjusting the
color intensity
Items to be used for adjusting the contrast
Items to be used for adjusting the sharpness/
interpolation
To adjust the color intensity (RED/GREEN/
BLUE)
The RED, GREEN and BLUE color component
settings are divided into 15 steps, from –7 to +7,
indicated by a value and graph. The center of the
graph (0) corresponds to the standard setting.
Menu When you
Adjustment want to
item
CYN-RED Make the
image
reddish.
Make the
image cyan.
Button to Adjustment
be direction on
pressed the menu
g button
Toward RED
G button
Toward CYN
(cyan)