Sony UP-55MD Mode D'emploi page 66

0.7 Vp-p
SYNC ON G: ON/OFF
SYNC (BNC × 1)
1.0±0.2, sync negative
S VIDEO (4-pin mini-DIN × 1):
Y: 1 Vp-p, sync negative
C: 0.286 Vp-p (NTSC), 0.3 Vp-p
(PAL)
VIDEO (BNC × 1):
1 Vp-p, sync negative
Controls connectors
REMOTE 1: special mini jack × 1
For RM-5500 Remote Control Unit
(not supplied)
REMOTE 2 (automatic printing
connector): Stereo mini jack: × 1
For RM-91 Remote Control Unit
(not supplied) or FS-24 Foot Switch
(not supplied) (See "Assigning
Functions to the Remote Control
Unit" on page 60.)
RS-232C (Computer control
interface):
D-SUB 25-pin connector × 1
Output: 5-kilohm load
Typical ±8 V
Input: 5-kilohm load
High level 5 to 15 V
Low level –5 to –15 V
USB host port for the USB flash memory device
Built-in clock Accurate within 180 seconds per
month
Supplied accessories
Paper tray (1)
Ink ribbon holder (1)
Before Using this Printer (1)
Instructions for Use (1)
CD-ROM (1)
Service Contact List (1)
Optional accessories
UPC-55 Color Printing Pack
Medical Specifications
Protection against electric shock:
Class I
Protection against harmful ingress of
water:
Ordinary
Degree of safety in the presence of a
flammable anesthetic mixture with
air or with oxygen or nitrous oxide:
Not suitable for use in the presence
of a flammable anesthetic mixture
with air or with oxygen or nitrous
oxide
Mode of operation:
Continuous
66
Specifications
Using the automatic printing capabilities
(REMOTE 2)
If you send remote control pulse signals as illustrated
through the REMOTE 2 connector, the printer can be
remotely controlled according to the remote control
setting. (See "Assigning Functions to the Remote
Control Unit" on page 60.)
CAPTURE timing pulse for REMOTE 2:
REMOTE 2 connector pin assignment:
MIN BUSY GND
Design and specifications are subject to change without
notice.