Sony UP-55MD Mode D'emploi page 59

Example of the actual color change in the test print
Yellow
Yellowish
greenish
Greenish Standard
Blue
Bluish
greenish
5
Select the image which has the best color balance
among the nine images.
If you want to change the color balance after you
see the printout, adjust the color balance again,
referring to "To readjust the color balance" on page
59.
6
Display the values of BAL X and BAL Y
corresponding to the ones of the image selected in
step 5 by using the G or g button.
Example: When the color balance (55 & 45) of the
image printed on the top right is the best:
Display 55 for BAL X and 45 for BAL Y by
pressing the G or g button.
The color balance of the printed image has been adjusted
to the values selected in step 5.
To readjust the color balance
When the desired color balance cannot be obtained in
step 5, readjust the color balance.
You can also perform fine adjustment following the
same operation procedures.
1
Display the values of BAL X and BAL Y of the
image which is the most appropriate among nine
images.
Orangish
Reddish
Red purplish
In this case, you can perform either fine adjustment
or a rough adjustment by changing the value of
BAL STEP.
To perform fine adjustment
To perform color balance adjustment within the
current color balance range, reduce the value of
BAL STEP.
If you change BAL STEP from 05 to 03, the color
balances of the test print are changed as illustrated.
Adjusting the Color and Picture Quality
59