Sony UP-55MD Mode D'emploi page 61

Function to be Operation
selected
b)
CYCLIC-C Captures images to memory
(CYCLIC CAPTURE) pages where there are no queued
images. It does this cyclically
whenever you press the switch.
The printer continues to capture
images, replacing the one
previously captured with a new
one.
b)
CAP-STOP Captures images in a memory
(CAPTURE STOP) page whenever you press the
switch of the remote control unit.
Once images have been captured
in all the memory pages, the
printer stops capturing images
and the message HIT ANY KEY
appears.
a)
BACK-SP The cursor (green pointer)
returns to its former position
whenever you press the switch
when the type of multiple
reduced images has been
selected.
POINTER+ The cursor (green pointer) moves
to the next position whenever you
press the switch when the type of
multiple reduced images has
been selected.
STOP Stops printing after the current
printing operation is finished
whenever you press the switch of
the remote control unit.
CAP/SRC When the memory image is
(CAPTURE/ displayed, the source image
SOURCE) appears when you press the
switch.
When the source image is
displayed, the image is captured
in memory when you press the
switch of the remote control unit.
However, the memory page is not
changed. The previously
captured image is replaced with
the new one.
b)
CAP/S PAGE When the memory image is
(CAPTURE/SOURCE displayed, the source image
PAGE) appears when you press the
switch of the remote control unit.
When the source image is
displayed, the image is captured
in memory when you press the
switch. The memory page is also
changed. The captured image is
not printed.
Function to be Operation
selected
PRINT & PAGE Starts to print when you press the
switch if the image has been
captured in the memory, and at
the same time moves to the next
memory page.
If the image has not been
captured in the memory page, the
printer does not work correctly
when you press the switch of the
remote control unit.
SRC & CAP When you press and hold down
(SOURCE & the switch of the remote control
CAPTURE) unit, the source image appears.
When you release the switch, the
image showing at the instant you
release the switch is captured.
The memory page is not
changed.
b)
SRC & C PAGE When you press and hold down
(SOURCE & the switch of the remote control
CAPTURE PAGE) unit, the source image appears.
When you release the switch, the
image showing at the instant you
release the switch is captured.
Then, the memory page is
changed to the next memory
page. The captured image is not
printed.
a) When you use the remote control unit with this function,
confirm that the source image is displayed on the video
monitor. If not, press the SOURCE/MEMORY button so
that the source image will be displayed. When multiple
reduced images are being captured, after the last image
is captured, the printer prints the captured image (or
queues printing), then the printer goes to the next
memory page.
b) When multiple reduced images are being captured, after
the last image is captured, the printer goes to the next
memory page.
61
Making Various Settings