Preparation; Supplied Accessories; Connections; Connecting Video Equipment - Sony UP-55MD Mode D'emploi

Preparation

Supplied Accessories

The printer is packed together with the following
accessories. Check that nothing is missing from your
package.
Paper tray (1)
Ink ribbon holder (1)
CD-ROM (1)
Before Using this Printer (1)
Instructions for Use (1)
Service Contact List (1)
Notes
• Retain the original carton and packing materials in
case you have to transport the unit in the future.
• Remove the ink ribbon cartridge and paper tray when
transporting the printer.
12
Supplied Accessories / Connections

Connections

To enable printing, video equipment to act as an input
signal source, and a video monitor to display images or
menus must be connected.
The following diagrams illustrate how to make the input,
output and remote control connections. Use this as a
guide when connecting the cables required to transmit
signals to and from the equipment to be used for
printing.
Notes
• Turn off the power of each device before attempting to
make any connections.
• Connect the AC power cord last.

Connecting Video Equipment

Connect the video equipment providing the video
images to be printed.
Connect the video equipment which will be used in
actual printing, using the following diagram as a guide.
Before connecting the video equipment, see "Important
safeguards/notices for use in the medical environments"
on page 2.