Sony UP-55MD Mode D'emploi page 16

2 Place the ink ribbon with the white gear as
illustrated.
2 Press the other side of the ink ribbon
until you hear it click into place.
3 Place the ink ribbon with the gray gear in the
same way as explained in step 2.
2 Press the other side of the ink ribbon
until you hear it click into place.
4 Eliminate any slack in the ribbon by turning the
gears.
16
Before Printing
1 Press the white gear of
the ink ribbon.
Match the color of the
gear of the ink ribbon
spool and the color of the
ink ribbon holder.
1 Press the gray gear of
the ink ribbon.
If the ribbon is left slack, it may be damaged
when the ink ribbon cartridge is inserted into
the printer.
Turn the gears in the direction of
the arrows until any slack is
eliminated and the magenta
section of the ink ribbon appears.
5
Insert the ink ribbon cartridge until it stops.
If the ink ribbon cartridge cannot be
inserted
In such a case, close the front door, and turn the
power off, then back on again. Insert the ink ribbon
cartridge again.