Selecting The Flash Mode - Sony UPX-C300 Mode D'emploi

Selecting the Flash Mode

3, 5
1
Display the Shooting menu.
For details on displaying the menu screen, see
"Displaying the Shooting Menu" on page 27.
2
Select FLASH MODE by pressing the v or V
control button.
3
Press the ENTER button.
The FLASH MODE screen appears.
4
Select the flash mode by pressing the v or V
control button.
For details on each mode, see "Flash Modes and
Example Shooting Conditions" on page 7.
5
Press the ENTER button.
If or was selected for the flash mode, the
Shooting menu reappears.
If was selected for the flash mode, the menu for
selecting the flash intensity level appears. Select a
flash intensity level (100/70/50/35/25/18/12%)
using the v or V control button, and press the
ENTER button. The flash intensity level is set, and
the Shooting menu reappears.
Setting the Aperture
You can only set the aperture when the FLASH MODE
is set to
3, 5
2, 4
1
Display the Shooting menu.
For details on displaying the menu screen, see
"Displaying the Shooting Menu" on page 27.
2
Select APERTURE by pressing the v or V control
button.
3
Press the ENTER button.
The APERTURE screen appears.
4
Select F4.7 or F5.6 by pressing the v or V control
button.
5
Press the ENTER button.
The Shooting menu reappears.
or .
2, 4
33
Menu