Using The Cd-Rom Manual; Reading The Cd-Rom Manual - Sony UP-DF750 Mode D'emploi

Using the CD-ROM
Manual
The supplied CD-ROM includes manuals for this imager
(in English, French, German, Italian, Spanish, Dutch,
Swedish, Portuguese, Finnish, Danish, Norwegian, Greek
and Russian). The copies of these manuals are created in
pdf (Portable Document Format).
Preparations
One of the following programs must be installed on your
computer in order to use the operation manuals contained
on the CD-ROM disc.
• Adobe Reader Version 6.0 or higher
Memo
If Adobe Reader is not installed, you can download it from
the following URL:
http://www.adobe.com/
Adobe and Adobe Reader are trademarks of Adobe Systems
Incorporated in the United States and/or other countries.

Reading the CD-ROM Manual

To read the manual on the CD-ROM, proceed as follows.
1
Insert the CD-ROM disc in your CD-ROM drive.
The manuals are saved in the Instructions For Use
folder.
2
Select and click the manual that you want to read.
Memo
The files may not be displayed properly, depending on the
version of Adobe Reader. In such a case, install the latest
version you can download from the URL mentioned in
"Preparations" above.
Note
If you lose the CD-ROM disc or you cannot read it for
some reason, you can purchase a new CD-ROM disc.
Contact your nearest Sony dealer.
Specifications
Power requirements
AC 100-120/200-240 V, 50/60 Hz
Input current 4.4/2.4 A
Operating temperature
10 °C to 30 °C (50 °F to 86 °F)
Operating humidity
20% to 80% (no condensation allowed)
Operating pressure
700 hPa to 1,060 hPa
Storage and transport temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage and transport humidity
20% to 80% (no condensation allowed)
Storage and transport pressure
700 hPa to 1,060 hPa
Dimensions Approx. 600 × 316 × 686 mm (w/h/d)
(23 5/8 × 12 1/2 × 27 1/8 inches) (Without
including projecting parts)
Mass Approx. 65 kg (143 lb 4 oz)
Printing system Thermal printing
Resolution 23.78 dot/mm (604 dpi)
Gradations 16,384 levels processing
Maximum print size
346.7 × 415.3 mm (when using the
UPT-517BL)
Picture elements
8,256 × 9,888 dots (w/h) (when using the
UPT-517BL)
Throughput Approx. 75 sheets/hour (excluding the
time for cooling the head) (when using
the UPT-517BL)
Digital interface
Network port × 1
(RJ-45 Modular jack), Conforming to
1000BASE-T/100BASE-TX standard
Input connector AC IN (for power)
Accessories supplied
Output tray (1)
Cleaning Kit (1)
Output tray stopper (1)
Film tray size adapter kit (1)
Before Using this Imager (1)
CD-ROM (1)
Service Contact List (1)
Accessories supplied separately
Blue Thermal Film UPT-517BL
Blue Thermal Film UPT-514BL
Blue Thermal Film UPT-512BL
Blue Thermal Film UPT-510BL
Blue Thermal Film UPT-M712BL
Blue Thermal Film UPT-M710BL
Cleaning kit UPA-500
Using the CD-ROM Manual / Specifications
9