Bluetooth Connection - Sony UPX-C300 Mode D'emploi

Masquer les pouces Voir aussi pour UPX-C300:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Bluetooth Connection

In the UPX-C300 system, the printer and the camera are
factory preset so that the camera automatically searches
for the printer for connection when both the printer and
the camera are turned on. Turn on the printer and the
camera according to the following procedures:
1
1
Turn on the printer.
Check that "Ready BT RSSI [----]" is displayed on
the operation display.
2
Set the on/standby switch of the camera to ? (on).
The camera starts searching for the printer, and
"DISCOVERING" is displayed on the LCD of the
camera. Upon establishment of connection between
the camera and the printer, the message changes to
"DISCOVERED," and the name and the Bluetooth
address of the connected printer are displayed in
black.
To interrupt searching
While "DISCOVERING" is displayed on the LCD of
the camera, press the MENU button. "CANCELING" is
displayed, and the search is interrupted. If several
printers are connected, the search for the remaining
printers is also interrupted.
N
O PE
PU SH
2
If the connection fails
The message "NOT DISCOVERED" is displayed on the
LCD of the camera, and the printer name and the
Bluetooth address remains displayed in gray. Even if the
connection fails, shooting and playback can be
performed on the camera.
If the connection fails, before retrying to connect, check
the following, then press the PRINT button. The
message "Reconnecting" is displayed and the
reconnection starts.
• The printer is turned on.
• The Bluetooth module of the camera and the printer is
set to ON.
• Between the camera and the printer, there is no
obstacle that disturbs data transmission.
For use with several printers connected, see "Operation
with Several Printers" on page 59 as well.
Checking the Bluetooth
Connection Statuses of the Camera
(PROPERTY)
1
Display the SETUP menu.
For details, see "Displaying the SETUP Menu" on
page 28.
2
Press v or V of the control button to select
Bluetooth.
3
Press the ENTER button.
The Bluetooth Menu display appears.
4
Press v or V of the control button to select
PROPERTY.
5
Press the ENTER button.
The Bluetooth information for the camera is
displayed.
You can scroll the printer list with v or V of the
control button.
Bluetooth
Sony DKC-C300X
ADDRESS:
00:13:E0:6F:4B:7F
PASS KEY: 1234
PRINTER LIST
1. Sony UP-DX100
ADDRESS
00:A0:96:12:24:E1
2. . . . . . . . . .
ADDRESS
- - :- - :- - :- - :- - :- -
3. . . . . . . . . .
ADDRESS
- - :- - :- - :- - :- - :- -
OK
When ENTER button is pressed, the display returns
to Bluetooth Menu.
Bluetooth address of
the camera
Passkey
List of the connected
printers
Setting the Bluetooth Functions
53

Publicité

Table des Matières
loading

Table des Matières