Technical Data - DS Produkte 00052 Mode D'emploi

Rinse the mixing bowl thoroughly with clean water. Clean the stirring adapter and the
cleaning pads with clean water.
Immediately clean the mixing bowl and accessories after use to prevent the formation
of germs:
1. Ensure that the product is disconnected from the mains supply!
2. After emptying the mixing bowl, rinse it briefl y under running water.
3. Remove the adapter and shank. For this, follow the instructions in the chapter "Using
the accessories properly".
4. Thoroughly rinse the mixing bowl, the shank, the cross-blade adapter and the clean-
ing pads under running water. You can use a mild detergent. If necessary, remove the
sealing ring from the shank.
5. If necessary, wipe the motor unit off with a damp cloth. Dry it off with a soft cloth.
6. You can clean the other accessories in the dishwasher. Clean the sealing rings for the
lid and steamer adapter separately.
7. Let all parts dry completely before reassembling them. Put all sealing rings back in.
8. Store the device in a clean, dry area that is not accessible to children and animals.
NOTE: The plastic parts may discolour with time. However, this is of no concern with
respect to health or the functioning of the device parts.

Technical data

Product number:
Model:
Voltage supply:
Output:
Safety class
Mixing bowl:
Timer:
Speed of the blade:
Temperature setting:
Scale:
Short-time operation:
00052_de-en-fr-nl_A5_V3_1.indb 43 00052_de-en-fr-nl_A5_V3_1.indb 43
43
00052
HB-FPC-01
220 – 240 V~, 50/60 Hz
max. 1500 W (heating element: 1000 W; motor: 500 W)
I
Non-rusting stainless steel with integrated heater and tempera-
ture sensor, maximum fi lling capacity of 2 litres
up to 60 minutes
11 levels (80 – 6000 rpm)
30 °C to 120 °C
Measurement range 5 – 2500 g in 1 g increments
2 minutes
EN
26.04.2018 08:55:56 26.04.2018 08:55:56