Troubleshooting; Technical Data - DS Produkte A02 Mode D'emploi

Troubleshooting

If the device is not working properly, please check whether you are able to rectify the problem
yourself fi rst. Otherwise contact customer service.
Do not attempt to repair a defective device yourself!
Problem
The device cannot be turned on.
The device deactivates before the
water boils.
The device does not deactivate.
An unpleasant odour arises during
use.

Technical data

Article no.:
Model:
Voltage supply:
Output:
Capacitance:
Safety class:
Z 08597
A02
220 – 240 V ~ 50 Hz
max. 2200 W
0.5 to 1.8 l
1
Potential cause/solution
• Is the On/Off switch in the correct position I
(ON)?
• Is the mains plug properly connected with the
socket?
• Is the socket defective? Try another socket.
• Check the fuse for your mains connection.
• Is the device overheated? Wait until the device
has cooled off, fi ll it with water and then retry.
• Was the water level below the MIN mark?
• Has the lid been closed properly?
• Is the switch jammed?
• Are you using the device for the fi rst time? An
odour often develops when using new devices for
the fi rst time. The odour should disappear once
you have used the device a few times.
• Did you just decalcify the kettle? Rinse it off with
clean water.
16