Troubleshooting; Technical Data - DS Produkte Z 03901 Mode D'emploi

EN
2. Let the mixture completely circulate through the device. Repeat the process if the
water still circulates slowly.
3. After you have fi nished decalcifying the device, allow water to circulate through the
device at least three times (without coffee grounds/a coffee pad) in order to rinse
the lines etc.

Troubleshooting

If the device is not working properly, please check whether you are able to rectify the
problem yourself fi rst.
Do not attempt to repair a defective device yourself!
Problem
The device is not
working.
The thermo cup / ce-
ramic cup is over-
fl owing.
The device is not
brewing coffee or the
brewing process is
very slow.

Technical data

Model:
Product:
Voltage supply:
Output:
Safety class:
Potential cause/solution
• Is the mains plug properly connected with the socket?
• Is the socket defective? Try another socket.
• Check the fuse for your mains connection.
• Is the device activated? Push the On/Off switch.
• Has the permanent fi lter and the permanent fi lter holder
been correctly inserted?
• Is there suffi cient water in the water tank?
• The water tank is overfi lled. Always fi ll the water tank with
an amount of water that the cup located under the coffee
spout is capable of holding!
• There is no water in the water tank.
• No coffee has been added to the permanent fi lter.
• The device must be decalcifi ed (see chapter "Care and de-
calcifi cation").
366326
Z 03901
220 – 240 V~ 50/60 Hz
650 W
I
20
Customer service/im-
porter:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
*) Calls subject to a charge.
Costs vary depending on the
provider.