Fuel Tank; Battery; Softener Pump (Option); Hoisting Frame / Lifting Eye (Option) - Dibo JMB-S Mode D'emploi

E N
M A I N T E N A N C E
10

Fuel tank

Check for damage or leakages. If damaged, you have to replace/repair the tank.
Regularly check the tank on contamination.
11

Battery

Check the battery on good connections / possible wear and whether the battery
needs to be recharged. If the idling battery voltage drops below: 12.6 V (or if
stored / not used during 6 months), this must be recharged. This can happen by
means of a trickle charger, standard charger or workhouse charger.
Reloading need to be done by a qualified technician.
Caution: ensure adequate ventilation when recharging,
avoid the risk of sparks (no smoking), ensure correct
electrical connection of the charger with the battery!
12

Softener pump (option)

The hose pump does not need to be purged.
Regularly clean the vent cap, remove product residues!
13

Hoisting frame / lifting eye (option)

Regular (visual) control on damages or wear of frame / eye. Let inspect the
delivered hoisting equipment 3 monthly by an approved inspection authority
and check daily on damages / cracks. In case of a defect, do not reuse the
hoisting equipment!
DiBO 38