Settings With Control Stick - Dibo JMB-S Mode D'emploi

On the left & right side you can check the tank levels (fuel & water) (option-
when choosing level measuring). When the level will decrease below 20%, the
display will visualize the level in red color.
Above 20%, the filling level will be displayed in green color.
Right below there's an indication if the burner is active or not (through indication
of flame/ strikethrough flame).
If you move the control stick 1x up & 1x down, the burner will turn off.
Temperature indication then becomes 0 ° C.
The burner hours are visible on the home screen if pushed on the clock key
(see photo at the bottom right).
These burner hours will only be visible at the time of pushing the (clock) key.
1

Settings with control stick

The screen includes a number of possible operating pages as shown on this
page (depending the selected options) when the control stick is operated.
General: when not operating the control stick, the control unit will automatically
return for 20 seconds to the main screen.
1 C O N T R O L S C R E E N - O P E R AT I N G I N S T R U C T I O N S
In this screen you can choose to check the various operating instructions.
Move the control stick to the left (no) or right (yes) to select.
Instructions (depending on chosen options):
DiBO 25
E N
O P E R AT I O N