Samsung SINAMICS G130 Mode D'emploi page 1059

p8500[0]
Data transfer bitwise 0
(r0863.0)
Digital signals 0 ... 7,
e.g. BO: r0863.0
(signal "Ready" of the p8500[7]
infeed unit).
(0)
r8510.0
r8510.7
p8501[0]
(r0722.0)
Data transfer bitwise 1
Digital inputs 0 ... 17
20 ... 21
p8501[21]
(r0722.21)
r8511.0
r8511.21
Data transfer p8502
wordwise 0 (0)
r8512
Data transfer p8503
wordwise 1
(0)
r8513
p8504
Data transfer
wordwise 2
(0)
r8514
p8505
Data transfer
wordwise 3 (0)
r8515
<1> The drive object CU_LINK only exists for automation systems with SINAMICS Integrated (e.g. SIMOTION D, SINUMERIK NCU) and the corresponding controller extension (e.g. CX32-2, NX10).
On the SINAMICS Integrated, each controller extension is represented by a drive object CU_LINK.
<2> p8800: CU_LINK address.
Address of the controller extension, represented by the drive object CU_LINK. The address correlates with the DRIVE-CLiQ socket of the control unit connected to the controller extension configured.
Value range: See p0918 (PROFIBUS address)
The parameter p8800 is only readable through non-cyclic parameter access via DPV1 services.
1 2
DO: CU_LINK, CU_CX32
CU_LINK - Data transfer
SINAMICS Integrated
<1> <2>
DO: CU_LINK (master)
p8520[0]
p8520[1]
p8520[2]
p8520[3]
3 4
Controller Extension
DO: CU_CX32 (slave)
DRIVE-CLiQ
5 6
fp_2211_51_eng.vsd
21.04.11 V04.05.00
r8510.0
r8510.7
p8500[0]
(0)
Data transfer bitwise 0
Digital signals 0 ... 7
p8500[7]
(0)
r8511.0
r8511.21
p8501[0]
Data transfer bitwise 1
(r0722.0)
Digital inputs 0 ... 3
8 ... 11
p8501[21]
16 ... 17
(0)
r8512
p8520[0]
p8502 Data transfer
wordwise 0
(0)
r8513
p8520[1]
p8503
Data transfer
wordwise 1
(0)
r8514
p8520[2]
p8504
Data transfer
(0) wordwise 2
r8515
p8520[3]
p8505
Data transfer
(0) wordwise 3
7 8
Function diagram
- 2211 -
SINAMICS