Samsung SINAMICS G130 Mode D'emploi page 1153

n_skip 1 n_skip 2
0.000...210 000.000 [RPM] 0.000...210 000.000 [RPM]
p1091[D] (0.000) p1092[D] (0.000)
<1> <1>
-1 -1 -1
n_min S_q
p1106[C]
(0)
n_min
p1080[D] (0.000)
Max
Setpt after limit
r1114
[3040.8]
-1
w
w
<1> A suppression speed of "0" de-activates the suppression speed bandwidth.
<2> The setting range of p1082 is limited to n_max_mot.
<3> If the drive is not stopped via the input setpoint, but via controlled intervention, the lower hysteresis branch is relevant after a subsequent run-up.
<4> Not at S150/G130/G150.
<5> For SERVO, the following applies: Only if the function module "Extended Stop and Retract" is activated (r0108.9 = 1).
<100> For SERVO, the following applies: Only if the function module "Extended setpoint channel" is activated (r0108.8 = 1). For r0108.8 = 0, [3095] applies for the generation of the speed limits.
1 2
DO: SERVO, VECTOR, VECTORGL, VECTORMV, VECTORSL
Setpoint channel - Skip frequency bands and speed limitations
n_skip 3 n_skip 4
0.000...210 000.000 [RPM] 0.000...210 000.000 [RPM]
p1093[D] (0.000) p1094[D] (0.000)
<1>
<1>
-1
y
w
w
w
w
w
w
<3>
n_skip bandwidth
-210 000.000...0.000 [RPM]
0.000...210 000.000 [RPM]
p1086[D] (-210 000.000)
p1101[D] (0.000)
3 4
n_limit pos
0.000...210 000.000 [RPM]
p1083[D] (210 000.000)
p1085[C]
p1083 (1083)
Maximum speed
0...210 000.000 [RPM]
p1082[D] (n_max_Mot)
<2>
p1051[C]
p1083 (1083)
Extended
retraction
p0888 = 2
n_set n. min_lim
r1112
y
0
ESR speed
x
p0893
1
<5>
p1052[C]
p1086 (1086)
p1088[C]
n_limit neg
p1086 (1086)
<101> To view the pre-assignment of the sampling times in p0115, refer to p0112.
5 6
fp_3050_51_eng.vsd
22.11.11 V04.05.00
p0115[3]
1000.00 μs
Refer to [1020.7]
<100> <101>
n_limit pos eff
Min
r1084
<4>[5030.5]
0
<4>[5210.1]
[6640.5]
[7020.5]
Reference value
[8010.2]
for the ramp-
[3020.6]
function generator
[3060.4]
[3070.4]
-1
0
RFG setpt at input
r1119
[3060.1]
[3070.1]
0
1
0
n_limit neg eff
Max
r1087
<4> [5030.5]
<4> [5210.1]
[6640.5]
[7020.5]
1000.00 μs
[8010.2]
7
Function diagram
SINAMICS
Maximum
limiting
active
[3080.4]
8
- 3050 -