13.2 Selection weighing / dosing mode
Call-up weighing mode:
This is the default setting. Use this mode, when neither stability nor reaction time must
be increased or reduced.
Call up menu
In weighing mode press the MENU button twice
Select menu item
Press the navigation buttons ( ) repeatedly until
„STAND" is displayed.
Confirm with TARE. The balance returns automatically
into weighing mode.
Call-up dosing mode:
Use this function if you wish to increase display speed, e.g. during apportioning.
However, please note that the balance is very susceptible to ambience conditions.
Call up menu
In weighing mode press the MENU button twice
Select menu item
Press the navigation buttons ( ) repeatedly
until „POURING" is displayed.
Confirm with TARE. From here on the balance is in
dosing mode (pouring mode), symbolised by the
indicator
.
54
ABS-N_ABJ-NM-BA-e-1614