Issue Functions; Automatic Data Output / Auto Print Function - KERN and SOHN ABS-N Série Mode D'emploi

16.2 Issue functions

16.2.1

Automatic data output / Auto Print function

Data output ensues automatically without pressing PRINT, as soon as the respective
output condition is fulfilled. This is defined by the menu setting.
Tab. 1:
stable /
positive

LD. .

LD.UL.

LD. .Z

LD.UL.Z
-
LD.OK .
Enable Auto Print function:
1. Invoke Data Output menu
 Press PRINT for 3 sec. in weighing mode.
2. Select function
 Press the navigation buttons ( ) repeatedly
until „APL.PRN" is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly until
„AUTO.PRN" is displayed. The current setting is marked
by the stability display ( ).
76
stable / Stabilisation /
negative zero display
- -

-

-
 
- -
Check
weighing
Output for stable and
-
positive weighing value
Output for stable and
-
positive or negative
weighing value.
Output for stable and
positive weighing value.
-
New output only after zero
display and stabilisation
Output for stable and
positive or negative
-
weighing value. New output
only after zero display and
stabilisation.
If the Auto Print function is
connected to the check
weighing function, data of

stable weighing values are
output with indicator display
.
.
ABS-N_ABJ-NM-BA-e-1614