Standstill Width - KERN and SOHN ABS-N Série Mode D'emploi

13.3 Standstill width

If the stability display lights up ( ), the weighing result will be stable within the range
indicated by the standstill width.
Set range for stability determination:
Call up menu
 In weighing mode press the MENU button twice
Select menu item
 Press the navigation buttons ( ) repeatedly until
„TOOLS" is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly
until „PARAMW" is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly
until „BAND" is displayed.
Set range
 Acknowledge using PRINT, the current setting is
displayed.
 Use the navigation buttons ( ) to select the desired
setting (0.5d, 1d, 10d, 50d, 100d, 1000d can be
selected).
0.5D Stability display ( ) very quiet environment
1000d Stability display ( ) busy environment
 Confirm with TARE. The current setting is marked by the
stability display ( ).
Return to weighing mode
 Press ON/OFF repeatedly or for 3 sec.
ABS-N_ABJ-NM-BA-e-1614 55