KERN and SOHN ABS-N Série Mode D'emploi page 183

7. Set data format
 Use ON/OFF to return to menu
 Press the navigation buttons ( ) repeatedly
until „D.FORM" is displayed.
 Press PRINT. The current setting is marked by the
stability display ( ).
 Press the navigation buttons ( ) repeatedly until the
desired setting (e.g. DF.1) appears.
 Press TARE.
Selectable settings (details see chpt. 15.4):
Display DF.1
Data Shimadzu
format Standard
8. Set separator
 Use ON/OFF to return to menu
 Press the navigation buttons ( ) repeatedly
until „DELIM" is displayed.
 Press PRINT. The current setting is marked by the
stability display ( ).
 Press the navigation buttons ( ) repeatedly until the
desired setting (e.g. DF.1) appears.
 Press TARE.
Selectable settings:
Display CR
Separator CR
9. Return to weighing mode
 Press ON/OFF repeatedly or for 3 s.
ABS-N_ABJ-NM-BA-e-1614
DF.2 DF.3
Shimadzu Mettler
Standard Standard
LF CR+LF
LF CR+LF
DF.4 DF.FREE
Options:
Sartorius
Head byte 1 -17,
Standard
Data length 8 -2
COMMA WINI
COMMA not documented
87