Zero Tracking Function - KERN and SOHN ABS-N Série Mode D'emploi

12.1 Zero tracking function

The zero tracking function „A.ZERO" is turned-on by factory.
1. Check menu setting
Zero tracking symbol
is displayed
is not displayed
2. Call function
 In weighing mode press TARE for 3 sec. and if
necessary press repeatedly the navigation buttons (
). until „Z.TRC" is displayed. The current setting is
marked by the stability display ( ).
With stability display ( )
Without stability display ( )
3. Enable/disable function
 Press TARE
4. Return to weighing mode
 Press ON/OFF repeatedly or for 3 sec.
ABS-N_ABJ-NM-BA-e-1614
Zero tracking function
switched on
switched off
Function turned on
Function switched off

49