Menu Lock - KERN and SOHN ABS-N Série Mode D'emploi

11.5 Menu Lock

The menu setting operations can be locked so that the settings cannot be inadvertently
changed. This menu lock is set with the following procedure.
Either
 Switch-on power supply of the balance and wait until
„OFF" is displayed
or
 Set balance into stand-by mode, see chpt. 10.2
Select menu item
1. Press MENU for 3 sec., the password inquiry appears.
2. Use the navigation keys ( ) to enter the password
see chpt. 3.1.1 „Numeric input".
+
Standard password (factory setting): „9999".
+
Change password, see following chapter
+
If a wrong password is entered, „ERR N"
will appear. Restart with step 1.
3. Confirm with TARE. The menu lock is enabled, the
symbol is activated. This is followed by a
reappearance of "oFF" or
 In weighing mode the symbol
 If a menu item selection is attempted in locked status,
the message "LOCKED" appears and the menu
selection is not allowed. To deactivate menu disabled,
follow the sequence of operations below:
Remove the menu lock
 With indication "oFF" or „
ABS-N_ABJ-NM-BA-e-1614
.
shows the menu lock.
", repeat step 1 – 3
or
45