Taring - KERN and SOHN ABS-N Série Mode D'emploi

10.6 Taring

The dead weight of any weighing container may be tared away by pressing a button, so
that the following weighings show the net weight of the goods to be weighed.
 Put vessel of goods to be weighed on weighing plate and close the wind screen
doors.
 Wait until the stability display appears ( ), then press TARE. The weight of the
container is now internally saved.
 Weigh the goods to be weighed and close the wind screen doors.
 Wait until the stability display appears ( ).
 Read net weight.
Note:
• The balance is able to only store one taring value at a time.
• When the balance is unloaded the saved taring value is displayed with
negative sign.
• To delete the stored tare value, remove load from weighing pan and
press TARE.
• The taring process can be repeated any number of times. The limit is
reached when the whole weighing range is exhausted.
ABS-N_ABJ-NM-BA-e-1614 35