Service, Maintenance, Disposal; Cleaning - KERN and SOHN ABS-N Série Mode D'emploi

17 Service, maintenance, disposal

17.1 Cleaning

Before cleaning, disconnect the appliance from the operating voltage.
Please do not use aggressive cleaning agents (solvents or
1. Display
similar agents), but a cloth dampened with mild soap suds.
2. Weighing Remove weighing plate, clean it wet and dry it before installation
plate
Please do not use aggressive cleaning agents (solvents or
3. casing,
similar agents), but a cloth dampened with mild soap suds. Take
housing,
care that the device is not penetrated by fluids and polish it with
case, box
a dry soft cloth.
Loose residue sample/powder can be removed carefully with a
brush or manual vacuum cleaner.
Spilled weighing goods must be removed immediately.
4. Glass doors These can be removed as described in the following. After that
clean with a commercially available glass cleaner.
Handle glass doors with care.
Attention: Risk of breakage
Risk of cuts.
Keep away your hands/fingers from the running rail.
ABS-N_ABJ-NM-BA-e-1614
Fig. 1: Clean the balance
93