3. Return to weighing mode
Press ON/OFF repeatedly or for 3 sec.
4. Start tolerance control
If necessary, place an empty container on the balance and tare it by pressing
TARE.
Place weighed goods and wait until the indicator
the help of the indicator check if the weighed goods are under, inside or over the
default tolerance
Example of entry:
<
Sample weight
UND.RG
(sample weight < 5 .0000g)
≤
UND.RG
sample weight
(sample weight 5.0000g - 5.9999g)
≤
LO.LIM
sample weight
(sample weight 6.0000g - 7.000g)
≤
<
HI.LIM
sample weight
(sample weight 7.0001g - 8.0000g)
Sample weight > OVR.RNG
(sample weight > 8.0000 g)
ABS-N_ABJ-NM-BA-e-1614
HI.LIM
LO.LIM
UND.RNG
OVR.RNG
<
LO.LIM
≤
HI.LM
OVR.RNG
or
appears. With
,
7.0000 g
6.0000 g
5.0000 g
8.0000 g
No indicator is
displayed
is displayed
is displayed
is displayed
No indicator is
displayed
71