Enable Edition „Component No - KERN and SOHN ABS-N Série Mode D'emploi

14.3.1 Enable edition „component no."
 Select formula mode, see chpt. 14.3
 When the symbol
button twice.
 Press the navigation buttons ( ) repeatedly until
„ELM.NUM" is displayed.
 Confirm with PRINT. The current setting is marked by
the stability display ( ).
Edition „component no."
with ( )
(e.g. CMP001)
without ( ) No edition „component no."
 Change using TARE.
Back to formula mode
 Press ON/OFF repeatedly or for 3 sec.
Printout examples (KERN YKB-01N):
Function ELM.NUM enabled
FORMULATION MODE
CMP001=
CMP002=
CMP003=
TOTAL=
66
appears, press the MENU
0.5361 g
0.5422 g
0.4488 g
1.5271 g
Function ELM.NUM disabled
FORMULATION MODE
0.5361 g
0.5422 g
0.4488 g
TOTAL= 1.5271 g
ABS-N_ABJ-NM-BA-e-1614