KERN and SOHN ABS-N Série Mode D'emploi page 181

3. Set the communication speed (Baud rate)
 Press PRINT
 Press the navigation buttons ( ) repeatedly
until „START" is displayed.
 Press PRINT. The current setting is marked by the
stability display ( ).
 Press the navigation buttons ( ) repeatedly until the
desired setting (e.g. 9600 bps) appears.
 Press TARE.
Selectable settings:
Display B0.300 B0.600
Baud rate 300bps 600bps
4. Set parity
 Use ON/OFF to return to menu
 Press the navigation buttons ( ) repeatedly
until „PARITY" is displayed.
 Press PRINT. The current setting is marked by the
stability display ( ).
 Press the navigation buttons ( ) repeatedly until the
desired setting (e.g. P.NONE) appears.
 Press TARE.
Selectable settings:
Display P.NONE
Parity Small parity, 8 bit
ABS-N_ABJ-NM-BA-e-1614
B0.1200 B0.2400 B0.4800 B0.9600
1200bps 2400bps 4800bps 9600bps
P.ODD
Odd parity, 7 bit
B.19.2k B.38.4k
19.2k bps 38.4k bps
P.EVEN
Straight parity, 7 bit
85