Zero / Tare Timing Change Function - KERN and SOHN ABS-N Série Mode D'emploi

12.4 Zero / tare timing change function

The zero / tare timing change function can be switched-on, when the „Auto
zero" and the „Auto tare" function are enabled.
1. Call up menu
 Press TARE for 3 sec. in weighing mode.
2. Select function
 Press the navigation buttons ( ) repeatedly
until „TARE.F" is displayed.
 Confirm with PRINT. The current setting is marked by the
stability display ( ).
With stability display ( )
Without stability display ( )
3. Enable/disable function
 Press TARE
4. Return to weighing mode
 Press ON/OFF repeatedly or for 3 sec.
52
Function turned on
Function switched off

ABS-N_ABJ-NM-BA-e-1614