Set The Start Display - KERN and SOHN ABS-N Série Mode D'emploi

10.3 Set the start display

For the start display you can choose between three types.
Start display
1. Weighing mode
2. Display
3. All segments
ABS-N_ABJ-NM-BA-e-1614
Explanation
After connection to the power
supply the balance will start in
weighing mode.
After connection to the power
supply the balance displays
After pressing a certain key the
balance will carry out a segment
test and start in weighing mode
automatically.
After connection to the power
supply the balance displays
After pressing any key the
balance will carry out a segment
test. Only after having pressed
TARE the weighing mode will
start.
Menu setting
.
.
31