Weighing - KERN and SOHN DLB 160-3A Mode D'emploi

8 Weighing

Start-up
Switching Off
Simple weighing
Taring
DLB_A-BA-e-1714
1. In stand-by mode press ON/OFF button.
As soon as the weight display appears, the balance is
ready for weighing.
2. Press the ON/OFF button, the balance returns into stand-by
mode.
3. Place goods to be weighed on balance.
4. Wait until the stability display appears []
5. Read weighing result.
6. Place the weighing box and press the TARE button.
„0-t" is displayed.
7. After standstill control the zero display appears.
The weight of the container is now internally saved.
8. Weigh the material, the net weight will be indicated.
After removing the weighing container, the weight of the
weighing container appears as negative display.
The tare weight is saved until it is deleted. Remove the load
from the balance and press the TARE button. „0-t" is
displayed, wait until the zero display appears.
The tare procedure can be repeated as many times as
necessary, for example with initial weighing of several
components for a mix (add-on weighing). The limit is
reached when the total weighing range capacity is full.
17