Moisture Analysis With Drying Program Prg1 - Prg5 - KERN and SOHN DLB 160-3A Mode D'emploi

11.1.1 Moisture analysis with drying program PrG1 – PrG5
After invoking a drying program PrG1, PrG2, PrG3, PrG4 or PrG5 previously stored
(see chap. 10.2) you are queried whether the preheating stage „PrH" shall be
connected.
If the preheating stage is added, the appliance will heat up to the set
temperature before starting the drying.
 Confirm the selected drying program, e.g. PrG1 (see chap. 11.1) using the PRINT
button. The query whether the preheating stage „PrH" shall be connected, will
appear.
 Use the navigation buttons   to select the desired setting.
PrH no = preheating stage switched off
PrH yes = preheating stage connected
DLB_A-BA-e-1714

35