KERN and SOHN DLB 160-3A Mode D'emploi page 97

 During drying the display can be switched over by repeated pressing of the
MENU button.
Moisture [%] = loss of weight (GV) from start weight (SG)
Dry mass [%] = residual weight (RG) of SG
ATRO [%] = SG : RG x 100%
Current temperature
Remaining time
Using the ON/OFF button drying can be finished at any moment if required.
 When drying is finished, you will hear an acoustic signal and the heating will be
shut off. The indicator „OK" displays the measuring result. Use the MENU button
to switch over into the result display.
DLB_A-BA-e-1714
Moisture [%]

Dry mass [%]

ATRO [%]

Residual weight in „g"
0 – 100%

100% - 0 %

100 – 999 %


41