Operating Instructions For The Balance; Balance Installation; Prepare The Weighing Chamber - KERN and SOHN ABS 80-4 Mode D'emploi

2.3.2 Operating instructions for the balance

2.4

Balance installation

2.4.1 Prepare the weighing chamber.

10
Remove the product from the weighing plate after
weighing it.
Do not force the balance to open.
Do not allow the balance to come into contact with water
or metal shavings.
If the balance is not used for an extended period of time
(7 days), unplug the power supply.
Do not weigh magnetic objects.
Do not exert any pressure on the weighing plate.
Remove the adhesive sheeting, adhesive strips and foam
material.
Place the following parts on the balance in sequential
order:
Protective ring (4)
-
Plate holder (3)
-
Plate (2)
-
ABS/ABJ-BA-e-0916