6.12 Setting the date (ABJ only)
Menu call:
SEttinG
CAL dEF
d-MM-DD
YY-MM-DD
Sequence:
(1)
Press and hold the CAL/MENU key until the function setting appears. Press the
TARE/
- key
(2)
Press and hold the CAL/MENU key until d-MM-DD appears (MM:month, DD:day)
(3)
Press the TARE/
DD: day).
(4)
Use the PRINT/ key
(5)
Use the UNIT/ key
(6)
Use the ON/OFF/ESC key to return to weighing mode. The setting is stored.
40
- key in order to set the current date /YY: year, MM: month,
to select the figure you wish to change (from left to right).
to increase the numeric value of the selected figure.
ABS/ABJ-BA-e-0916