5. Setting the drying period for time-controlled switching-off
After acknowledgement of the drying temperature by
drying period is flashing.
Using arrow keys
confirm by
Using arrow keys
confirm by
Confirm input by
drying process and displayed on screen. All settings are stored under the ident
number <1> until a new method is allocated to the ident number.
34
, select the desired value for the first digit and
, the next digit is flashing.
, select the desired value for the next digit and
, the next digit is flashing. Repeat this procedure for all digits.
. All parameter settings will be applied to a subsequent
, the currently set
DAB-BA-e-1813