Rs 232 Interface; Technical Data; Setting The Baud Rate - KERN and SOHN DAB-BA-def-1813 Mode D'emploi

12 RS 232 interface

Condition:
The following conditions must be met to provide successful communication between
the moisture analyser and the printer.
Disconnect moisture analyser from the power supply and connect to the
appliance interface with a suitable cable. Faultless operation requires an
adequate KERN interface cable.
Communication parameters of the RS 232 interface of moisture analyser and
printer must match.

12.1 Technical data

Connection
Baud-Rate
Parity

12.2 Setting the baud rate

 Press
,then release quick und press
indicated.
 Using arrow keys
 Confirm with
38
9 pin d-subminiature bushing
Pin3 - TxD
Pin5 - GND
1200 / 2400 / 4800 /9600 selectable
7bits / 2 stop bits
select baud rate .
.
fast. The current baud rate is
DAB-BA-e-1813