Setting Hours And Minutes - KERN and SOHN ABS 80-4 Mode D'emploi

6.13.2 Setting hours and minutes

Menu call:
SEttinG CAL dEF
t-HH-MM
SEC AdJ
tm.AdJ
HH-MM-SS
Sequence
:
(1) Press and hold the CAL/MENU key until the function setting appears. Press the
TARE/ - key.
(2) Press and hold the CAL/MENU key until t-HH-MM appears (HH:hour, MM:min.)
(3) Press the TARE/
(4) Press the CAL/MENU key, tm.AdJ will appear.
(5) Press the TARE/
(6) Use the PRINT/ key
The figure to be changed will flash.
(7) Use the UNIT/ key
(8) Use the ON/OFF/ESC key to return to weighing mode. The setting is stored.
42
- key, SEC AdJ will appear.
- key to set the current time (HH: hour, MM: min., SS: sec.).
to select the figure you wish to change (from left to right).
to increase the numeric value of the selected figure.
ABS/ABJ-BA-e-0916