Setting The Id Number - KERN and SOHN ABS 80-4 Mode D'emploi

6.11 Setting the ID number

Remarks: The balance ID number will be printed on the printout.
Menüaufruf:
SEttinG CAL dEF
CAL Set
id: 1234
Sequence:
(1) Press and hold the CAL/MENU key until the function SettinG appears on the
display. Press the TARE/
(2) Press and hold the CAL/MENU key until ID e. g. id:1234 appears on the display.
Press the TARE/
(3) Use the PRINT/ key
(4) Use the UNIT/ key
(5) If the weight has changed, press the TARE/
Use the ON/OFF/ESC key to return to weighing mode.
ABS/ABJ-BA-e-0916
- key
- key
to select the figure you wish to change (from left to right).
to increase the numeric value of the selected figure
- key to check the value weight.
39