Operating Menu Of The Balance; Modifying The Settings; Setting Modifications; Menu Call - KERN and SOHN ABS 80-4 Mode D'emploi

4

Operating menu of the balance

The operating menu of the balance can be used to set up the balance to meet your
specific needs. The operating menu is normally set up during manufacture and does not
require any modifications. Nevertheless, the balance can be customised for special
applications through the operating menu.
4.1

Modifying the settings

4.2

Setting modifications

18
To change certain settings, select the respective functions.
A function can be modified by the following three steps:
-

Menu call

- Function setting
- Confirm and store
To adjust a function, the ON/OFF/ESC, CAL/MENU and
TARE/ key are equipped with special functions.
-
CAL/MENU = Menu selection and menu option processing
from top down (↓).
TARE/ = Select function.
Once the display function has been selected with the
CAL/MENU key, perform a call by using the TARE/
for the modification.
CAL/MENU = Select one of the possible function settings.
Processing of menu options from top down.
TARE/ = Confirmation and storage of setting with
TARE/ key of current display.
-
The standby indicator will indicate the setting for the
current function.
ON/OFF/ESC = Exit from function
Press the ON/OFF/ESC key function briefly
to return to previous menu.
Press the ON/OFF/ESC key function for longer
to return to weighing mode.
key
-
ABS/ABJ-BA-e-0916