Display Unit; Intrument And Control Functions - Babboe Mini Mountain Manuel D'utilisation

Do not short the contacts of the battery pack. Doing so could cause the battery pack to become hot or catch fire,
resulting in serious injury or property damage.
Do not disassemble or modify the battery pack. Doing so could cause the battery pack to become hot or catch
fire, resulting in serious injury or property damage.
If the power cable is damaged, stop using the battery charger and have it inspected at an authorized dealer.
Do not turn the pedals or move the bicycle while the battery charger is connected. Doing so could cause the
power cable to become tangled in the pedals, resulting in damage to the battery charger, power cable, and/or
plug.
Handle the power cable with care. Connecting the battery charger from indoors while the bicycle is outdoors
could result in the power cable becoming pinched and damaged in a doorway or window.
Do not run over the power cable or plug with the wheels of the bicycle. Doing so could result in damage to the
power cable or plug.
Do not drop the battery pack or subject it to impact. Doing so could cause the battery pack to become hot or catch
fire, resulting in serious injury or property damage.
Do not dispose of the battery pack in a fire or expose it to a heat source. Doing so could cause fire, or explosion,
resulting in serious injury or property damage.
Do not modify or disassemble the e-Bike Systems. Do not install anything other than genuine parts and
accessories. Doing so could result in product damage, malfunction, or increase your risk of injury.
When stopped, be sure to apply the front and rear brakes and keep both feet on the ground. Placing one's foot
on the pedal when stopped may unintentionally engage the power assist function, which could result in loss of
control and serious injury.
Do not ride the bicycle if there is any irregularity with the battery pack or e-Bike Systems. Doing so could lead to
loss of control and serious injury.
Be sure to check the residual battery capacity before riding at night. The headlight powered by the battery pack
will turn off soon after the residual battery capacity has decreased to where power assisted riding is no longer
possible. Riding without an operating headlight can increase your risk of injury.
Do not start off by running with one foot on a pedal and one foot on the ground and then mounting the bicycle
after it has reached a certain speed. Doing so could result in loss of control or serious injury. Be sure to start
riding only after you are seated properly on the bicycle seat.
Do not press the pushing assist switch if the rear tire is off the ground. Otherwise, the tire will turn at high speed
in the air and you could be injured.
Do not use the wireless function with Bluetooth low energy technology in areas such as hospitals or medical
institutions where use of electronic equipment or wireless equipment is prohibited. Otherwise, this could affect
the medical equipment, etc. and cause an accident.
58
When using the wireless function with Bluetooth low energy technology, keep the display at a safe distance from
heart pacemakers in use. Otherwise, the radio waves could affect the heart pacemaker function.
Do not use the wireless function with Bluetooth low energy technology near automatic control equipment such as
automatic doors, fire alarms, etc. Otherwise, the radio waves could affect the equipment and cause an accident
through possible malfunction or unintentional operation.
E. INSTRUMENT AND CONTROL FUNCTIONS

Display unit

TIP
The USB receptacle is for connecting the designated YAMAHA tool; it cannot be used as a power supply.
F. Instrument and control functions
Display unit (Display A)
USB receptacle Assist mode
indicator
Assist mode
switch (up)
Assist mode
switch (down)
Pushing assist Light switch
switch
TIP
The USB receptacle is for connecting the designated YAMAHA tool; it cannot be used as a power
supply.
Speedometer
Automatic mode
indicator
Battery capacity
indicator
Function display
Power switch
59