BFT VISTA SW 260 SXL Instructions D'utilisation page 31

(4) You can only limit the use of the lock (for the lock types 2, 3, 4, 6) if certain operating logics are selected.
(5) You can manage a feedback command from the lock indicating that it is released: after issuing the release command, the electronic control unit waits for the
consent from the lock before starting the opening. If it is not received within the maximum set time, the automation opens the door anyway.
(6) You can use one of the auxiliary inputs as a manual lock release command operating in parallel with the automatic release command, which can be used to open
the door in manual mode.
The function is compatible with the following types of electric lock, which can be set using parameter 10 (see the paragraph "DISPLAY OPERATING PARAMETER
MANAGEMENT").
Legend
= REVERSING
STROKE
PARAM-
TYPE
ETER
10
1
ELECTRIC LOCK WITH
MECHANICAL REARM
11
AT CLOSE-BACK
10
2
ELECTROMAGNET
11
(MAGLOCK)
10
3
ELECTRIC LATCH
11
10
4
MOTORIZED LOCK
11
10
5
ELECTRIC LOCK WITH
AUTOMATIC REARM
11
10
6
ELECTROMAGNET
(MAGLOCK) WITH
11
DELAY
INSTALLATION MANUAL
= ACTIVATION
OPENING
VALUE OPERATION
An electric lock that, when
1
powered in pulse mode,
releases the leaf and
automatically rearms itself
when the leaf closes back. It
requires the reversing stroke
RANGE 0÷9
to facilitate the leaf release.
[t=50÷500 ms]
2 A magnet that, if powered,
holds the door locked and
that, if not powered, releases
it. It does not require
the reversing stroke. The
magnet is powered back
RANGE 0÷9
when the door has not
[t=200÷2000 ms]
closed back yet to facilitate
its full closure.
3 An electric lock that, if
powered, operates a latch
holding the door locked. If
not powered, it raises the
latch and releases the leaf. It
requires the reversing stroke
RANGE 0÷9
to facilitate the leaf release.
[t=200÷2000 ms]
The magnet is powered back
when the door is closed.
An electric lock equipped
4
with an electric motor that,
if powered, moves back the
locking pawl and releases
the leaf. It requires the
reversing stroke to facilitate
RANGE 0÷9
the leaf release. The power
[t=500÷5000 ms]
supply to the electric lock
is cut off when the door is
closed.
An electric lock that, when
5
powered, releases the leaf.
It is rearmed by releasing
the voltage after about 10°
of opening. It requires the
reversing stroke to facilitate
the leaf release.
RANGE 0÷9
[t=100÷1000 ms]
A magnet that, if powered,
5
holds the door locked
and that, if not powered,
releases it. It does not
require the reversing stroke.
The magnet is powered
back after the leaf has fully
RANGE 0÷9
closed.
[t=200÷2000 ms]
= DOOR OPEN BY 10°
Command
t=50÷500ms(Parameter 11)
Command
t=200÷2000ms(Parameter 11)
Command
t=200÷2000ms(Parameter 11)
Command
Command
Command
t=200÷2000ms(Parameter 11)
= DOOR ALMOST
CLOSED
DIAGRAM
t [ms]
t=500÷5000ms(Parameter 11)
t [ms]
t=100÷1000ms(Parameter 11)
t=100 ÷1000 ms(Parameter 11)
t [ms]
t [ms]
VISTA SW 260 SXL / VISTA SW 260 MXL -
= DOOR CLOSED
t [ms]
t [ms]
31