Cleaning And Maintenance; Cleaning The Cutter On The Outside; Removal And Cleaning Of The Carriage - Graef SKS 700 Instructions D'utilisation

Cleaning and maintenance

WARNING!
Danger of injury!
Inexpert cleaning may lead to injuries.
- Switch the unit off before cleaning and pull the power cord from the elec-
tric socket.
- Let the unit cool down before cleaning.
- Check whether the stop has been closed (the blade edge must be cov-
ered).
- Proceed with caution when wiping the blade.

Cleaning the cutter on the outside

- Use a soft and moist cloth to clean the outer surfaces of the unit. Use a
mild detergent in case of heavy soiling.
NOTE!
Risk of damage!
Improper handling of the cutter can lead to damages of the unit.
- Do not use any aggressive or abrasive detergents and no solvents.
- Do not scratch off stubborn soiling with hard objects.
- Do not immerse the unit in water.
- Do not put the unit in the dishwasher and do not use it under running
water.
- Never put the carriage into the dishwasher.
- Never put the blade into the dishwasher which may affect the sharpness
and the corrosion resistance (salt attacks the blade). Handling the blade
when loading and unloading from the dishwasher is another danger
point.

Removal and cleaning of the carriage

In order to clean the carriage better, it can be removed from the unit.
1. Press the unlock button upwards and keep holding it.
2. Remove the carriage.
DE
EN
FR
NL
IT
ES
DK
NO
SE
PL
HU
UKR
41