Cleaning And Maintenance; Cleaning The Cutter On The Outside; Removal And Cleaning Of The Slide - Graef SKS 500 Instructions D'utilisation

Cleaning and maintenance

WARNING!
Danger of injury!
Inexpert cleaning may lead to injuries.
- Switch the unit off before cleaning and pull the power cord from
the electric socket.
- Let the unit cool down before cleaning.
- Check whether the stop has been closed (the blade edge must be
covered).
- Proceed with caution when wiping the blade.

Cleaning the cutter on the outside

- Use a soft and moist cloth to clean the outer surfaces of the unit. Use a mild
detergent in case of heavy soiling.
NOTE!
Risk of damage!
Improper handling of the cutter can lead to damages of the unit.
- Do not use any aggressive or abrasive detergents and no solvents.
- Do not scratch off stubborn soiling with hard objects.
- Do not immerse the unit in water.
- Do not put the unit in the dishwasher and do not use it under
running water.
- Never put the slide into the dishwasher.
- Never put the blade into the dishwasher which may affect the
sharpness and the corrosion resistance (salt attacks the blade).
Handling the blade when loading and unloading from the
dishwasher is another danger point.

Removal and cleaning of the slide

In order to clean the slide
1. Pull out the slide latch
2. Remove the slide
3. Use a moist cloth or running water to clean all parts.
4. Once a month, add some drops of resin-free oil or petroleum jelly to the
26
4
better, it can be removed from the unit.
11
.
4
.