Unpacking The Unit; Prior To First Use; Basic Cleaning; Initial Operation And Use - Graef SKS 500 Instructions D'utilisation

Masquer les pouces Voir aussi pour SKS 500:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
requirements of the installation location have to be met:
- The unit has to be placed on a solid, flat, horizontal, and non-
slipping surface with a sufficient weight-carrying capacity.
- Make sure that the unit cannot topple over.
- Choose the location in such a way that children cannot reach the
blade of the unit or the supply lines.
- Never use the unit outdoors, and always keep it in a dry place.
- The unit is not designed for installation in a wall or a built-in
cupboard.
- Do not set up the unit in a hot, wet or moist environment.
- The socket has to be easily accessible so that the power cable can
be removed easily in case of emergency.

Unpacking the unit

When unpacking the unit, proceed as follows:
1. Remove the unit from the box.
2. Remove the packaging parts.
3. Remove any stickers on the unit (do not remove the type plate).

Prior to first use

Danger of injury!
The very sharp blade can cause injuries.
- Proceed with caution when wiping the blade.

Basic cleaning

Prior to first use, the blade
in order to remove any possible production residue. See chapter "Cleaning and
maintenance".

Initial operation and use

WARNING!
Danger of injury!
The very sharp blade can cut off body parts. Your fingers and thumbs
24
CAUTION!
3
of the unit must be wiped off using a moist cloth

Publicité

Table des Matières
loading

Table des Matières