Using The Standard Holder For Remainders; Child Protection - Graef SKS 500 Instructions D'utilisation

especially are at risk.
- Never reach into the space between the stop plate and blade as
long as the stop plate is not completely closed, i.e. set to
„0").
- Do not touch the blade with your fingers.

Using the standard holder for remainders

The unit must not be used without the end-piece holder, unless the
size and shape of the slicing material does not allow its use.
1. Insert the plug into the socket.
2. Place the slicing material on to the slide
3. Place the holder for remainders
material.
4. Set the requested cutting thickness
5. Place the cutter tray
6. Either hold the intermittent switch
6
switch and slide it downward in order to switch to permanent operation.
7. Press the slicing material lightly against the stop.
8. Evenly move the slide towards the blade
9. After completing the cutting process, either release the intermittent switch
6 or slide the switch upward again.
TIP:
● Soft slicing material (such as cheese or ham) can be cut best when chilled.
● Soft slicing material can be cut better when moved forward slowly.
After a continuous operation of 10 minutes, let the motor cool
down for an hour.

Child protection

To secure the blade
4
push the slide
4
The slide is secured. To enable the child-proof safety catch, the adjustment
knob must be turned clockwise past the zero setting up to the limit. Now push
the safety slide to the outside as far as possible. The adjustment knob and on/off
switch are not blocked.
8
7
below the unit.
4
(stop plate must be closed, i.e. positioned below "0"),
in front of the blade
4
.
on the rear wall of the slide at the slicing
5 .
6
pressed or press the intermittent
3
.
3
and press the slide latch
DE
EN
(below
FR
NL
IT
ES
DK
PL
9
in.
25