Unpacking; Requirements For The Installation Location - Graef HE80EU Manuel D'utilisation

Always pull the supply cord from the electric
•
socket using the connector plug, not the
supply cord.
Do not carry the unit by the supply cord.
•
Never transport the unit during operation.
•
Do not touch the plug with moist hands.
•
Do not use the packing material as a toy.
•
Danger of suffocation.
Follow the instructions regarding the
•
requirements for the place of installation and
on the unit's electrical connection to prevent
personal harm and property damage.
Switch off the appliance and disconnect
•
from supply before changing accessories or
approaching parts that move in use.
Let the unit cool off before cleaning.
•
Do not use any aggressive or abrasive
•
cleaning agents and do not use any solvents.
Do not scratch off stubborn soiling with hard
•
objects.
Make sure that no liquid gets into the interior
•
of the unit.
Do not put the unit in the dishwasher and do
•
not hold it under flowing water.

Unpacking

To unpack the unit, proceed as below:
Take the unit out of the carton.
•
Remove all pieces of the packing.
•
Remove any possibly extant labels on the
•
unit (do not remove the rating plate).

Requirements for the installation location

For safe and flawless operation of the unit,
the place of location must meet these
prerequisites:
The unit must be set up on a firm, flat, level,
•
non-slip and heat resistant base that has
sufficient load bearing capacity.
Select the place of location so that children
•
cannot reach the hot surfaces of the unit.
The unit is not intended for installation in a
•
wall or a built-in cupboard.
Do not set up the unit in a hot, wet or moist
•
environment.
The electric socket must be easily accessible
•
so that the power cord can be easily
unplugged.
DE
EN
FR
NL
IT
SE
NO
PYC
9